What the RS-9 slip-on changes on the Papio SS/CL
The CFMOTO Papio SS/CL 24-25 uses a 126cc air-cooled upright engine and a six-speed transmission. Yoshimura's RS-9 Street Series slip-on is designed to fit under the tail section, matching the mini bike's styling while cutting weight and adding a stronger sound note. The supplied information confirms a 4.0% max hp and 4.0% max torque gain on the 126cc engine, and the stock muffler weighs 5.1 lbs versus 3.4 lbs for the RS-9—almost two pounds saved.
If you are considering a Honda Papio CL exhaust upgrade, note that the supplied catalog record is for the CFMOTO Papio SS/CL 24-25. Confirm your exact model and year before ordering, because the listing does not cover other Papio generations or Honda models.
Key numbers before you start
- PAPIO SS/CL 24-25 RS-9 Stainless Slip-On Exhaust, w/ Aluminum Muffler: Performance gain: 4.0% max hp and 4.0% max torque on the 126cc engine. Sets a realistic expectation for the seat-of-the-pants difference on a small-displacement mini bike.

PAPIO SS/CL 24-25 RS-9 Stainless Slip-On Exhaust, w/ Aluminum Muffler - PAPIO SS/CL 24-25 RS-9 Stainless Slip-On Exhaust, w/ Aluminum Muffler: Stock muffler: 5.1 lbs. Yoshimura RS-9 slip-on: 3.4 lbs. The weight saving is one of the clearest, most measurable benefits of the swap.
- PAPIO SS/CL 24-25 RS-9 Stainless Slip-On Exhaust, w/ Aluminum Muffler: Sound levels with the supplied INS-RS9-B insert, J2825 standards: stock 74.7 dB at 2000 rpm and 81.1 dB at 5000 rpm; RS-9 79.3 dB at 2000 rpm and 89.3 dB at 5000 rpm. Helps you judge the sound increase and decide whether to keep the insert fitted for your riding environment.
A sensible order for the Papio SS/CL slip-on install
The supplied record does not include a full step-by-step procedure, torque values, or gasket part numbers. Use the sequence below as a planning framework, and follow the instructions that come with your kit for the final details.
- 1. Confirm fitment and gather the kit: Check that your bike is a CFMOTO Papio SS/CL 24-25 and that the RS-9 slip-on is the correct listing. The record confirms the muffler is designed to fit under the tail section; it does not list a separate mid-pipe or gasket, so inspect the kit contents before you begin.
- 2. Support the bike and let the exhaust cool: Work on a stable surface and make sure the stock exhaust is fully cool before touching it. The catalog does not give a specific cool-down time, so use your judgment and avoid any contact with hot metal.
- 3. Remove the stock muffler: The stock muffler weighs 5.1 lbs, so support it as you loosen its mounting points. The supplied information does not specify fastener sizes or whether the stock clamp is reused, so keep the removed hardware organized and compare it with the new kit.
- 4. Test-fit the RS-9 under the tail: The RS-9 is shaped to sit under the tail section. Before tightening anything, check that the muffler clears the bodywork and that the outlet is positioned as intended. The record does not give a recommended clearance measurement, so visually confirm no contact.
- 5. Fit the supplied sound insert if needed: The INS-RS9-B insert is supplied and was used for the published sound figures. Decide whether to run it based on your local noise rules and preferred sound level; the record does not state whether the insert is removable after installation, so check the insert and kit instructions.
- 6. Tighten, then recheck: Tighten mounting hardware in a logical order and recheck clearances after the first ride. The supplied information does not provide torque specifications, so use the kit instructions or a qualified technician for final tightening.
Aluminum muffler care that fits a mini bike routine
The RS-9 uses an aluminum muffler. The supplied record does not include a formal care schedule, so the habits below are general good practice for keeping the finish and function in shape without inventing manufacturer instructions.
- Clean after dirty or wet rides: Road grime, dust, and salt can dull the aluminum finish. Wash the muffler with mild soap and water once it has cooled, and avoid abrasive pads that can scratch the surface.
- Inspect the sound insert: The INS-RS9-B insert is part of the supplied setup. Check it periodically for blockage or looseness, especially if the sound note changes. The record does not give a replacement interval, so inspect rather than assume.
- Check mounting hardware: A small bike vibrates, and a slip-on relies on its mounts. Look over the mounting points after the first few rides and again at regular service intervals. The catalog does not list torque values, so have a technician check them if you are unsure.
- Watch for contact with bodywork: Because the RS-9 tucks under the tail, a shifted mount can bring it close to plastic. A quick visual check after each wash helps catch movement early.
What the supplied information does not settle
The catalog record confirms the performance gain, weights, sound levels, and tail-section fit, but it does not include a full installation manual, torque specs, gasket part numbers, or a detailed maintenance schedule. It also does not state whether the RS-9 requires any fuel or ECU adjustment on the Papio SS/CL. If you need those details, check the instructions included with the kit or ask a qualified Yoshimura dealer before you ride.
For riders comparing this to a Honda Papio CL exhaust upgrade, the record only covers the CFMOTO Papio SS/CL 24-25. Treat that as the supported fitment unless the catalog listing for your exact model says otherwise.


