Yoshimura R&D of America, Inc.

GSX-R1000 19-22 EM PRO Racing ECUワイヤーハーネスセット

GSX-R1000 19-22 EM PRO Racing ECUワイヤーハーネスセット - Main image
$560.07 $889 In stock

Category: レースシリーズ

含まれるもの

  • EM PRO Racing ECU用メインハーネス (#490-50A-0000)
  • メーターハーネス
  • スイッチアセンブリー(右ハンドル)

♦ これらのレースパーツはFIM規制に従って開発されています。
♦ これらのレースパーツを使用する際は、各レースの規制に従ってください。
♦ レーシングキットパーツは、クローズドコース走行または競技専用であり、一般道での使用を意図していません。
♦ レーシングキットパーツは、車両の排出ガスや騒音に関連する部品を変更する可能性があり、一般道で使用すると法律に違反し、罰金や罰則が科される可能性があります。
♦ レーシングキットパーツは保証の対象外です。レーシングキットパーツを取り付けると、メーカーの車両保証が無効になる場合があります。

最高のパーツでレースに臨んでいることを実感してください。

Yoshimura R&Dは、姉妹会社であるYoshimura Japan(YJP)およびYoshimura Asia(YAT)の 北米唯一の正規販売代理店 です。YJP/YATは、日本やヨーロッパなどの規制の厳しい市場で要求される出力制限されたシステムとは異なり、無制限バージョンのレーシングコンポーネントを開発・テストしています。この輸入製品は、規制の緩い市場向けに特別に構成されています。つまり、米国市場でのレースに最適なカスタムエキゾーストを手に入れることができるのです。

米国仕様を当社から購入しない場合に失うもの

  • 証明書
  • 社内テクニカルサポート
お支払い前の確認

利用可能な支払方法と最終金額は購入手続きで表示されます。

発送までの時間

注文の処理時間と配送時間の両方を見込んでください。

Standard Shipping: 出荷準備(営業日) 0–1; 輸送(営業日) 7–15.

Express Shipping: 出荷準備(営業日) 0–1; 輸送(営業日) 7–15.

規定を見る
返金が必要なとき

返金については注文番号を添えて店舗にお問い合わせください。

返送前に返金処理期間をご確認ください。

規定を見る
配送料金

お届け先と選択した配送方法の料金をご確認ください。

Standard Shipping · アメリカ合衆国: $0.00

Express Shipping · アメリカ合衆国: $3.99

規定を見る
返品前の確認

返送する前に適用される返品条件をご確認ください。

アメリカ合衆国 · 返品期限(受取後の日数): 30. 返品方法: 郵送. 返品送料: 販売者負担.

規定を見る

Customer Reviews (4.8 / 5 · 5 reviews)

Stella C. ★★★★★

The right-hand switch assembly feels properly race-bred, and the meter harness routing is clean enough that I didn't have to fight it during the install. Everything matched the FIM-spec layout I needed for my track build, and the bike fired up without a hiccup after swapping over to the EM PRO ECU.

Abigail W. ★★★★★

The main harness plugged right in with exact pin placements, saving hours of wiring guesswork. The entire setup feels solid, and the meter harness integrates cleanly with my stock dash. Definitely worth upgrading to if you're tracking the bike seriously.

Scarlett R. ★★★★★

The FIM-spec switch assembly on the right handlebar is a huge upgrade over the stock unit, and the meter harness plugged in without any splicing drama. Wiring is clean and labeled clearly, so tracing a line for the race ECU took me minutes, not hours.