Yoshimura R&D of America, Inc.

SUZUKI RM-Z250 2004-06 ヘッドガスケット 0.30mm

SUZUKI RM-Z250 2004-06 ヘッドガスケット 0.30mm - Main image
$5.05 $8.15 In stock

Category: 純正アクセサリー

  • T=0.48mm ヘッドガスケット

以下のベースガスケットを使用すると圧縮比が向上します:

  • 0.48mmのベースガスケット = 12.8:1 圧縮比 (0000A-D8110-14R)

*標準圧縮比 = 12.0:1

シリンダーヘッドの加工が必要になる場合があります。資格のあるプロのメカニックのみが取り付けてください。

お支払い前の確認

利用可能な支払方法と最終金額は購入手続きで表示されます。

発送までの時間

注文の処理時間と配送時間の両方を見込んでください。

Standard Shipping: 出荷準備(営業日) 0–1; 輸送(営業日) 7–15.

Express Shipping: 出荷準備(営業日) 0–1; 輸送(営業日) 7–15.

規定を見る
返金が必要なとき

返金については注文番号を添えて店舗にお問い合わせください。

返送前に返金処理期間をご確認ください。

規定を見る
配送料金

お届け先と選択した配送方法の料金をご確認ください。

Standard Shipping · アメリカ合衆国: $0.00

Express Shipping · アメリカ合衆国: $3.99

規定を見る
返品前の確認

返送する前に適用される返品条件をご確認ください。

アメリカ合衆国 · 返品期限(受取後の日数): 30. 返品方法: 郵送. 返品送料: 販売者負担.

規定を見る

Customer Reviews (4.8 / 5 · 5 reviews)

Sebastian ★★★★★

Installed this during a top-end rebuild and the 0.48mm thickness raised compression noticeably—my RM feels punchier off the bottom. The fit was spot-on with no extra prep needed.

Ruby I. ★★★★★

Bolted this head gasket on during a top-end rebuild and the 0.48mm thickness bumped compression noticeably over the stock setup. The engine feels crisper through the midrange and starts easier with the 12.8:1 ratio. No issues with sealing after a few hard practice sessions.

Victoria ★★★★★

Fits perfectly on my 2004 RM-Z250 and the 0.30mm thickness definitely woke up the top end without needing to mess with base gaskets. Compression feels noticeably snappier than before.