What the Front Micro Turn Signal Kit Includes
The Yoshimura Front Micro Turn Signal Kit for the Kawasaki Z900RS (2018-2026) is a custom kit with everything needed for a front signal upgrade. It includes one set of intensely bright Yoshimura Micro Signals (Part # 072BGMICRTSR), a custom set of 3D printed signal plates for the front, new heat shrink solder sleeve butt connectors, and all mounting hardware.
The mounting plates are 3D printed with Onyx—a nylon mixed with non-continuous carbon fiber—offering high strength, excellent UV/heat resistance, and a paintable surface. Despite the signals being roughly the size of a dime, they are among the brightest on the market.
Installation Steps
Follow these steps to install the front micro turn signal kit on your Z900RS. Work on a stable surface and disconnect the battery before starting any electrical work.
- 1. Remove the stock front turn signals: Carefully remove the factory front turn signals from your Z900RS. The kit is not compatible with stock turn signals, so you will need to fully remove the original units.
- 2. Attach the custom 3D printed mounting plates: Position the Onyx mounting plates on the front of your bike. Use the supplied mounting hardware to secure them. The plates are designed specifically for the Z900RS front location.
- 3. Connect the Micro Signals using the heat shrink solder connectors: Use the included heat shrink solder sleeve butt connectors to attach the Micro Signals to your bike's wiring. These connectors simplify the wiring process and provide a weather-resistant joint.
- 4. Mount and test the Micro Signals: Secure the Micro Signals to the plates. Reconnect the battery and test the signals for proper operation. Confirm brightness and flash rate before finalizing the installation.
Kit Contents and Compatibility
- Z900RS 18-26 FRONT MICRO TURN SIGNAL KIT: The kit includes one set of Yoshimura Micro Signals (Part # 072BGMICRTSR), custom 3D printed signal plates for the front, heat shrink solder sleeve butt connectors, and all mounting hardware. You get everything needed for a complete front signal upgrade without sourcing extra parts.

Z900RS 18-26 FRONT MICRO TURN SIGNAL KIT - Z900RS 18-26 FRONT MICRO TURN SIGNAL KIT: The mounting plates are 3D printed with Onyx (nylon mixed with non-continuous carbon fiber) for high strength, UV/heat resistance, and paintability. The plates are durable, weather-resistant, and can be painted to match your bike's finish.
- Z900RS 18-26 FRONT MICRO TURN SIGNAL KIT: Micro Signals are roughly the size of a dime and are among the brightest signals on the market. Despite their compact size, the signals provide excellent visibility for safety.
- Z900RS 18-26 FRONT MICRO TURN SIGNAL KIT: The kit is not compatible with stock turn signals. You must remove the factory signals entirely; this kit is a full replacement, not an add-on.
Wiring and Electrical Notes
The included heat shrink solder sleeve butt connectors make wiring straightforward. Ensure you have a heat source (like a heat gun or lighter) to activate the solder and shrink the tubing. Confirm polarity if your bike uses a specific wiring standard. The catalog does not specify the exact wire colors for the Z900RS, so consult your service manual or test with a multimeter if unsure.
After connecting, test the signals before reassembling any bodywork. If the flash rate is too fast or too slow, you may need a load equalizer—this is not included in the kit.
What the Catalog Does Not Settle
The supplied information confirms the kit fits the Kawasaki Z900RS model years 2018-2026 for the front turn signal location. It does not specify whether the signals are DOT/ECE approved, nor does it provide exact wire color codes or required tools beyond the included connectors. For any electrical troubleshooting, refer to your bike's factory service manual.
The catalog also does not mention a specific torque value for the mounting plate bolts. Tighten them securely by hand, avoiding over-torquing the 3D printed material.


