Yoshimura R&D of America, Inc.

Joint de culasse 0,48 mm pour SUZUKI RM-Z250 2004-06

Joint de culasse 0,48 mm pour SUZUKI RM-Z250 2004-06 - Main image
$11.52 $16.45 In stock

Category: Accessoires d'origine

  • T=0.48mm Joint de culasse

La compression est augmentée lors de l'utilisation des joints de base suivants :

  • JOINT DE BASE de 0.40mm = compression 12.3:1
  • JOINT DE BASE de 0.30mm = compression 12.8:1 (0000A-D8110-24S)

*Compression standard = 12.0:1

Peut nécessiter une modification de la culasse ; doit être installé uniquement par un mécanicien professionnel qualifié.

Avant de payer

Les moyens de paiement et le total final s’affichent au paiement.

Quand part la commande

Prévoyez le temps de préparation et de transport.

Standard Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Express Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Voir les conditions
Demander un remboursement

Contactez la boutique avec votre numéro de commande pour demander un remboursement.

Contactez-nous pour connaître le délai de remboursement avant le retour.

Voir les conditions
Frais de livraison

Vérifiez le tarif pour votre destination et le service choisi.

Standard Shipping · États-Unis: 0,00 $US

Express Shipping · États-Unis: 3,99 $US

Voir les conditions
Retourner un article

Vérifiez les conditions avant de renvoyer un article.

États-Unis · Délai de retour (jours après réception): 30. Mode de retour: Par courrier. Frais de retour: À la charge du vendeur.

Voir les conditions

Customer Reviews (4.2 / 5 · 5 reviews)

Chloe G. ★★★★★

Switched to this 0.48mm head gasket with the 0.30 base gasket and the bike feels noticeably snappier off the bottom. The thickness measurement was spot-on with a caliper, so no issues sealing.

James H. ★★★★★

Bolted it on with the 0.30 base gasket and the bike's got a noticeable bark off the bottom now. The 0.48mm thickness is spot on for a quick compression bump without any fitment headaches. Feels like a solid upgrade for the money.

Benjamin ★★★★☆

The 0.48mm thickness was exactly as spec'd, so the deck clearance math worked out cleanly on the first try. Paired it with the 0.30mm base gasket to hit the 12.8:1 ratio—noticeable snap down low, though I wish the kit included the base gasket. It's a no-nonsense upgrade if you're doing a top-end ref