Fitment questions before you order
- Which CRF450R models does this RS-9T system fit?
- The listing names the CRF450R 17-20 and the CRF450R-S 2022. That is the fitment the catalog confirms, so treat other years or models as unverified until you check with the seller.
- Does it work with the CRF450R-S 2022?
- Yes, the CRF450R-S 2022 is included in the product title. The same dual tapered RS-9T system is listed for that model alongside the 17-20 CRF450R.
- Will it work with Honda's optional electric start?
- The catalog states the system works with or without Honda's new optional electric start system. That is a confirmed compatibility point, not an assumption.
- What does the catalog not confirm about installation?
- No preparation or operating instructions are supplied in the record, and no torque values, clearances, or step-by-step procedure are given. Those details are not confirmed by the supplied information, so do not treat this article as an install manual.
What the RS-9T system is built to do
- CRF450R/RX 17-20 / CRF450R-S 2022 RS-9T Stainless Full Exhaust, w/ Stainless Mufflers: Stainless steel header and tail-pipe with dual tapered RS-9T mufflers. Confirms the material and dual-muffler layout so you know what you are fitting before you order.

CRF450R/RX 17-20 / CRF450R-S 2022 RS-9T Stainless Full Exhaust, w/ Stainless Mufflers - CRF450R/RX 17-20 / CRF450R-S 2022 RS-9T Stainless Full Exhaust, w/ Stainless Mufflers: The new RS-9T mufflers have more volume than stock and are positioned forward to tuck under the side number plates. Explains the physical layout that affects clearance and mass centralization on the CRF450R.
- CRF450R/RX 17-20 / CRF450R-S 2022 RS-9T Stainless Full Exhaust, w/ Stainless Mufflers: A 3-stage header provides a broader overall range of power and throttle response. Describes the design intent behind the header, which is relevant if you are comparing it with a stock or single-muffler system.
Dual muffler setup and clearance: what the design changes
The RS-9T is a dual tapered muffler system, and the catalog says the mufflers are moved forward to tuck in under the side number plates. That forward position is the key clearance point to understand: it is a deliberate layout choice for mass centralization, not a generic slip-on fit.
The tail pipe divider is described as creating smoother exhaust flow and better velocity to the right and left tail pipe. The larger RS-9T core is listed as improving throttle response and power in the mid and top end. Those are the design claims in the record, and they are the reason the system is shaped the way it is.
The catalog does not give measured clearances, torque figures, or a step-by-step fit procedure. If you need those, they are not confirmed by the supplied information, so check with the seller or a qualified technician rather than guessing.
Sound, inserts, and spark arrestor options
- CRF450R/RX 17-20 / CRF450R-S 2022 RS-9T Stainless Full Exhaust, w/ Stainless Mufflers: New RS-9T mufflers have more volume than stock to provide a decrease in overall dB noise level. Addresses the noise question directly: the larger muffler volume is intended to lower overall dB versus stock.
- CRF450R/RX 17-20 / CRF450R-S 2022 RS-9T Stainless Full Exhaust, w/ Stainless Mufflers: Sound insert and spark arrestor options are listed, including INS-RS9B-K, INS-RS9C-K, SA-14-K, and SA-15-K. Shows that insert and spark arrestor choices exist, so you can plan for the sound and spark arrestor setup you need.
- CRF450R/RX 17-20 / CRF450R-S 2022 RS-9T Stainless Full Exhaust, w/ Stainless Mufflers: A volume insert is listed among the specifications. Confirms a volume insert is part of the system's listed specification, which matters if you are managing sound levels.
Performance and setup questions
- What performance change does the catalog claim?
- The record says the system provides more tractable power and improved torque, with the larger core improving throttle response and power in the mid and top end. Those are the catalog's claims, not independently measured figures in this article.
- Is the RS-9T tested?
- The catalog states the system was dyno and track tested by Honda R&D in Japan, American Honda MX Team, and HRC All Japan MX Racing Team. That is the testing background given in the record.
- Does the system include a spark arrestor?
- Spark arrestor options are listed, including SA-14-K and SA-15-K. The record does not state that a spark arrestor is included as standard, so confirm what is in the box before you rely on it for spark-arrestor-required riding areas.
- What sound insert options are listed?
- The record lists INS-RS9B-K and INS-RS9C-K as sound insert options. It does not state which insert is installed by default, so check the listing or ask the seller if that matters to you.
What the catalog does not settle
The record does not include preparation or operating instructions, torque specifications, or measured clearance figures. It also does not confirm whether a spark arrestor or a specific sound insert is included as standard. Those gaps are decision limitations, not proof that the full manufacturer documentation lacks them.
If your decision depends on a detail the catalog does not confirm, the practical move is to ask the seller before ordering rather than assume. The confirmed points are the fitment years, the electric-start compatibility, the stainless construction, the dual forward-positioned muffler layout, and the listed insert and spark arrestor options.


