Back to Blog
Product Reviews 2026-11-16 Yoshimura R&D of America, Inc. 0 views

GSX-S750 R-11 Slip-On: Fitment and First-Ride Checklist

GSX-S750 R-11 Slip-On: Fitment and First-Ride Checklist

The R-11 slip-on cuts weight and adds midrange punch on the GSX-S750 and GSR750. Here's what fits, what changes, and what to check on your first ride.

Why the R-11 is a smart first upgrade for the GSX-S750

The GSX-S750 engine traces its roots to the GSX-R750, and the R-11 slip-on is designed to wake up that character without a full exhaust swap. Yoshimura lists a weight drop of up to 4.8 lbs from the stock unit, plus measurable gains in horsepower and torque. For riders who want a sharper naked bike without diving into engine internals, this is a focused bolt-on change.

This guide covers the R-11 stainless slip-on for the 2011-16 GSR750 and 2017-23 GSX-S750. You will see the key numbers, what the catalog confirms about fitment, and a practical checklist for your first ride after installation.

R-11 by the numbers: weight, power, and sound

Fitment: what the listing confirms and what to verify

The product record lists fitment for the GSR750 2011-16 and GSX-S750 2017-23. It does not specify whether the slip-on retains the stock catalytic converter or requires a servo eliminator. Before ordering, confirm with your dealer or Yoshimura directly whether your model year has any additional requirements, such as a lambda sensor provision or ECU flash. The R-11 is a slip-on, so it replaces the muffler and mid-pipe section; the stock header remains.

The stainless muffler is the standard finish. A blued titanium version is also listed at 5.1 lbs, but this article focuses on the stainless model. The included volume insert and spark arrestor options are noted in the catalog; the spark arrestor is included (INS-YJP-04-K). If you ride in areas requiring spark arrestors, this is a plus.

First-ride checklist after installing the R-11 slip-on

  1. Check all fasteners: After the first heat cycle, re-torque the muffler clamp and mounting bolts to the specifications in your service manual. Stainless hardware can settle.
  2. Inspect for leaks: With the engine idling, listen and feel around the joint for exhaust leaks. A small amount of sealant may be needed if the slip joint does not seal perfectly.
  3. Listen for new sounds: The R-11 has a distinct tone. Confirm that any ticking or popping is normal for the design and not an indication of a loose connection.
  4. Verify insert and spark arrestor: If you installed the volume insert or spark arrestor, confirm they are secure and do not rattle. Remove them only if you accept the louder sound levels.
  5. Check clearance: Ensure the muffler and mid-pipe clear the swingarm, rear brake line, and bodywork through the full suspension travel.

Sound, inserts, and real-world trade-offs

The R-11 is not a quiet pipe. At 5000 rpm, the catalog shows 98.9dB versus 88.9dB stock. That is a substantial increase. The included volume insert can reduce output, but the catalog does not specify the exact reduction. If you ride in noise-sensitive areas or have early-morning starts, plan to use the insert. The spark arrestor is included and adds a layer of safety for off-road or mixed-use riding.

On the plus side, the weight savings and midrange torque make the bike feel lighter and more responsive. The stainless finish is durable but will show heat discoloration over time, which is normal for stainless exhausts. Clean it with a dedicated stainless cleaner to keep it looking fresh.

Catalog details that affect your purchase decision

Who should buy the R-11 slip-on

If you own a 2011-16 GSR750 or 2017-23 GSX-S750 and want a lighter, more vocal exhaust with a proven midrange boost, the R-11 stainless slip-on is a well-supported choice. It is particularly appealing if you value Japanese manufacturing and a complete kit that includes a spark arrestor. Riders who need to keep noise levels near stock should plan on using the volume insert or look elsewhere.

Before you order, confirm that your bike does not require any additional parts for the slip-on installation, such as a gasket or servo eliminator. The catalog does not list these, so a quick check with the seller is wise. Once installed, the first-ride checklist above will help you catch any issues early and enjoy the R-11's character with confidence.

Related Articles

Customer Service
Home
Products
Cart
Profile